m	1-800-358-SKIM     Fax (440)543-7404
m	m	m
	Abanaki Corporation manufactures oil skimmers and other pollution control equipment that helps waste generators deal with their cradle-to-grave responsibilities in the use of oils, greases, solvents, and related hydrocarbons. Skimmer models are available with removal rates up to 200 gallons per hour. Use of Abanaki equipment often allows water and oil to be recycled thus avoiding contingent liabilities and costs associated with disposal. The firm's experience in this type of equipment dates back to 1968. The reliability of the Abanaki's products is attested to by the fact that it still supplies routine maintenance parts for units in operation more than 20 years. Besides off-the-shelf oil and grease skimmers, Abanaki supplies custom-designed (turnkey) pollution control systems for a wide variety of applications.	m

Abanaki Oil Skimmers For All Applications:

Mighty Mini™

•Smallest and lightest Abanaki skimmer - about six pounds

•Easily hand carried to the source of the problem - can fit almost anywhere

•Oil removal rates up to 1.0 gph (3.8 lph)

•Designed for tank depths from 6" to 24" (15.2 cm to 61.0 cm)

•Belt and tail pulley can fit through a 2" (5.1 cm) diameter bung hole

•Great for automotive and mobile equipment service shops

•Very Affordable

The portable Tote-It®

 •36 lb., single unit portability

•Also for permanent installations with limited access areas

•Oil removal rates up to 12 gph (45 lph)

•Standard length is 5' center to center

•Best suited for heavy duty needs without heavy duty cost

 Oil Grabber® Model 4

 •A single unit elevates and separates oil at a rate up to 20 gph

•Lifts oil any distance without the need of expensive pumps

•Maintains skimming efficiency with fluctuating fluid level

•Can be used in depths as shallow as one foot, or as deep as 100 feet

•Requires no tank modifications in most applications

•Operates in turbulent liquid using optional tail pulley cage and tether assembly

•Easy mounting and fast cleaning, with minimal maintenance

Oil Grabber® Model 8

•Like the Model 4 with additional features

•A single unit elevates and separates oil at a rate up to 40 gph

•Can be used with a full range of Abanaki options

(heater, debris rakes, belt and tail pulley tethers, etc.)

•Designed to last 20+ years

•Flagship of Abanaki's product line

Oil Boss

•Skims 20 gph and is made out of Stainless Steel

•Drive unit is completely covered

•Comes with a pilot light and on/off selector

•Used primarily in jobs where Stainless Steel and a covered unit is desired

 

Oil Grabber® Model MB

•Designed for jobs with thinner viscosity oils and/or require a high skimming capacity

•Each belt increases the capacity by 40 gph

•2x8 skims 80 gph

•3x8 skims 120 gph

•Utilizes continuous belts and wipers to remove up to 200 gallons of oil per hour from the fluid surface

Grease Grabber™

 •Abanaki's most rugged unit

•Works for both greases and oils

•Grease removal rates up to 160 gph (606 lph)

•Designed for extremely demanding environments

•Suitable for outdoor drainage pits in primary metal mills

•Optional boom mast mount with swing arm for large pits and tanks

•Integral 700W heater keeps skimmed grease fluid for easy discharge

 PetroXtractor™ - Well Oil Skimmer

•Used primarily for groundwater remediation through monitoring wells or remediation wells

•Comes in three varieties:

•PX-A for 2" diameter wells (3gph, SAE 30)

•PX-B for 4" diameter wells (6gph, SAE 30)

•PX-C for 6" diameter wells (12 gph, SAE 30)

•Some options include: explosion proof setup,

below grade mounting kits, housing and air motors

Oil Concentrator™

•Removes residual water in the skimmed oil

•Provides virtually complete oil/water separation

•An optional unit available on all Abanaki oil skimmers

•Uses no electricity, timers, sensors, pumps, or other moving parts

•Optional heater available for high viscosity oils and low temperatures

•Removable sludge screen and drain plug facilitate routine maintenance

•All hardware provided for easy mounting to Abanaki skimmers

Other Abanaki Advantages:

1. Depending on model selected, skimmer belt material may be user specified corrosion-resistant steel, carbon steel, or specially engineered polymers.

2. The standard material for belt wipers is Nitrile; CRV is optional.

3. The standard housing utilizes a corrosion-resistant powder coated finish; 316 stainless steel housings are available on most models.

4. Abanaki skimmers will perform well in the full range of liquid water temperatures, with pH between 1 and 13.

5. Belt length is specified by the user; some length restrictions apply.

6. The standard drive on all units is an electric motor and gear reducer. Other drive types available.

Abanaki supplies custom designs and turnkey systems to meet specific application needs; call your sales representative or the factory for specification assistance and a detailed quotation.

For much more go to the Abanaki Corporation website!

Copyright © 1998 by Abanaki Corporation. All Rights Reserved.

---